pvx
Showing all 6 results
-
Construction equipment, Solution product lines
Production line of PVC profiles for Rom
As the construction market expands, the reformation of building materials is also developing. It is no secret that aluminum frames have gradually replaced traditional wooden frames. But aluminum frames have a big minus side, even if it passes 70% of cold and hot air from the street. This requires a lot of electricity to keep the room temperature at the same level in winter and summer. Considering this, the current market demand is for plastic frames made of PVC profiles.
SKU: n/a -
Plastic recycling
PVC decorative panels production line
List of required equipment:
- Delivery equipment 3 pcs
- PVC mixer
- Vibrating sieve
- Portable bunker (silo) 2 pcs
- Extruder equipment
- Vacuum calibration equipment
- Equipment for straightening PVC panels and bringing them to the next stage
- Laminating and stamping equipment
- Cutting equipment
- Finished product assembly equipment
- PVC film cutting equipment
- PVC crushing crusher equipment
- Special pulverizer (mill) for PVC
- Molds
SKU: n/a -
Plastic recycling
Special mixer for PVC
High performance requirements, new properties of raw materials, sequence of technological processes or increasing quality requirements – there are many reasons for adjusting the parameters of the production line. Often, quality preparation of the first step in the technological chain of the material is not considered properly. However, a well-optimized mixture is the basis of a highly reproducible result. The function of these mixers is to ensure uniform and equal distribution of stabilizers, oil-based materials and modifiers. This mixer turns the mixture into a dust-free, dry state.
The heating mixer is designed to heat and mix the material and all parts to a temperature of 110 C to 130 C for 5-8 minutes. This process binds all compounds to the material particles. However, at this temperature, bonding waxes are still somewhat viscous and the composite tends to not compress under pressure. Therefore, the mixture is transferred from the heating mixer to the cooling mixer, where it is cooled to about 40 C. After that, the mixed material is cooled in a vertical cooling mixer. In the next step, the mixed material can be used for ensiling and further processing including extrusion.
SKU: n/a
