Whipped polyethylene tubes production line for insulation

Features of insulation pipes:

• Reliably protects against condensation and heat loss.
• Environmentally friendly, safe to use, does not require the use of personal protective equipment.
• Materials do not burn
• Swallows noise.
• Resistant to moisture.
• Significantly reduces heat losses, which ultimately saves money.
• Operating temperature range: -40 to +90 ° C.
• The service life is 50 years.

Overview of the line

Equipment and devices within the line

Automatic raw material delivery equipment

Delivery speed	200 kg / h
Motor power	0.75 kw
Delivery height	Up to 3 meters

 

Automatic raw material (powder-shaped) conveying equipment

Delivery speed	0.5-2 kg / h
Motor power	0.75 kw

 

Extruder equipment

Motor (explosion proof	Motor, Brand: Siemens
Motor power	22 kW
Reducotor	Polished metal
Schesterna material	high quality steel
Surface hardness	54-62 HRC
Accuracy	Class 6
Vint
Screw diameter	Daschatlari75mm
Screw material	Given nitrogen ishkov. Surface hardness above 38CRMNALA HV900
Heating and cooling
Heating zones	Zone 8
Heating circle material for plasticizing part	stainless steel
Circle material for the cooling part	explosion-proof cast aluminum
Cooling method	With water

 

Bhutan delivery system

Pump type	High pressure
Type of foam-forming equipment	Diluted butane dosing pump
Transfer rate	16L / hour
Output pressure	10-30 Mpa
Motor (explosion proof	2.2 kw

 

Anti-compression system (GMs pump)

Pump type	Superior
Single cylinder anti-compression gear type	Dispensed glycerin monostearate dosing pump
Transfer rate	3.6 L/H
Dosage container size	10L
Output pressure	10-30 Mpa
Engine power	0.75 kW

 

Automatic high speed hydraulic setka change system

Hydraulics station	1 vol.
Electrical appliances and pipes	1 set per engine
Motor power	3 kw

 

Extruder head (golovka) and mold

Structure	Round extruder has adjustable and pressure measuring device output head
Materials	Thermally machined high quality steel
Temperature control zone	Zone 3
Temperature control accuracy	±1° C
Heating power	3 kw
Water cooling system in the head part	Available

 

Air cooling ring

Cooling type	Using an air loop
Fans	3pcs x 0.33 kw
Cooling ring diameter	Depending on the diameter of the product

 

Pipe pulling and cutting equipment

Capacity	2.2 kw
Cooling type	Air ring
Speed control system	Available
Length measurement system	Available
Management system	Available

 

Conveyor

Length	3 m
Kuvai	1,5 kVt

 

Management system

1. The control system is equipped with an air cooling fan to ensure that all electrical components work in good condition.
2. To ensure that the equipment always works in the best condition, all parts in the electric control Cabinet have been used from internationally famous brands.

Tower for cooling with water

Watercourse	50m3 / so
Size	2215x2215x2830 mm
Fan diameter	1400 mm
Motor power	1.5 kw

 

 

Air compressor

Motor power	7,5 kVt
Size	180 L