Mix production equipment AF-L011

WIRE STRETCHING EQUIPMENT

Entrepreneurs who want to make more money from the business of mixing, buy a wire with a diameter of 5.5 mm and stretch it to the diameter they need. In this process, the mass of the wire does not increase or decrease. In this line, you can also make a profit by selling different diameter wires, there is a difference between the prices of thick diameter wire and non-thick diameter wire. The wire stretching line we recommend can stretch from 5.5mm to 1.2mm. Wire stretching is carried out in two stages, and in the first stage it is stretched up to 2 mm.

Wire stretching equipment
Produced	China
Model	APL560/APL480
Incoming wire diametric(MAX)	6.5 mm
Outgoing wire diametric(MIN)	1.2mm
Power consumption	88kw/h
Speed of operation	50-60m/min
Motor type	Inverter
Control Panel	PLC+buttom

 

WIRE HEATING FURNACE

Wires stretched up to 2 mm are inserted into a heating furnace and kept at a temperature of 850 C for 2-3 hours. This process serves to increase the elasticity of the wire. At the end of this process, you can again stretch the wire to a diameter of 1.2 mm.

Wire heating furnace
Produced	China
Model	HF2000
Internal temperature	950C
Working temperature	850C
Power consumption	120kw/h
For heat storage part	35kw/h
Heat up time	2-3 hours
Control panel	PLC+buttom
Production volume	2 tons/at one time

 

TIP ROLLER

The tip roller equipment prepares the end of the wire for the stretching equipment, that is, by making the three parts into a flat shape, it brings it into a state where it rolls well on the drum.

 

Type roller
Produced	China
Model	TR6
Internal temperature	950C
Voltage	380v50hz
Power consumption	3kw/h
Wire diameter	6.5-2mm

 

WIRE WELDING EQUIPMENT

Wire welding equipment is also involved in the wire stretching process. This equipment connects the end of the wire in the new wire wrap by welding when the wire in the wire wrap is depleted. After that, the wire will not be disconnected.

Wire welding equipment
Produced	China
Model	DH 6.5
Weight	150 kg
Voltage	380v50hz
Power consumption	10kw/h
Wire diameter	6.5-2mm

 

MIX PRODUCTION EQUIPMENT

The finished coils of wire are placed in the nailing equipment. Depending on what size nail you need, you can choose a nailer. If you want to produce all kinds of nails, then it is advisable to buy the equipment recommended below.

Mix release equipment AF-1C(9-25mm)
Produced	China
Model	AF-1C
Weight	560 kg
Voltage	380v50hz
Power consumption	1.5kw/h
Wire diameter(MIN)	0.9mm
Wire diameter(MAX)	1.6 mm
Size	1440*1040*1270mm
Speed of operation	450 pieces/min

 

Mixing equipment AF-2C(20-60mm)
Produced	China
Model	AF-2C
Weight	1200 kg
Voltage	380v50hz
Power consumption	2,2kw/h
Wire diameter(MIN)	1,2mm
Wire diameter(MAX)	2,8 mm
Size	1640*1215*1370mm
Speed of operation	350 pieces/min
The length of the mix	20-60 mm

 

Mixing equipment AF-3C(25-85mm)
Produced	China
Model	AF-3C
Weight	1400 kg
Voltage	380v50hz
Power consumption	3 kw/h
Wire diameter(MIN)	1,8mm
Wire diameter(MAX)	3,8 mm
Size	1990*1200*1250mm
Speed of operation	300 pieces/min
The length of the mix	25-85 mm

 

Mixing equipment AF-4C(25-85mm)
Produced	China
Model	AF-4C
Weight	1700 kg
Voltage	380v50hz
Power consumption	4 kw/h
Wire diameter(MIN)	1,8mm
Wire diameter(MAX)	3,8 mm
Size	2200*1400*1350 mm
Speed of operation	190 pieces/min
The length of the mix	30-110 mm

 

Mixing equipment AF-5C(70-170mm)
Produced	China
Model	AF-5C
Weight	1900 kg
Voltage	380v50hz
Power consumption	5,5 kw/h
Wire diameter(MIN)	3mm
Wire diameter(MAX)	6 mm
Size	2800*1500*1550mm
Speed of operation	170 pieces/min
The length of the mix	70-170 mm

 

POLISHING EQUIPMENT

After the nail comes out of the nailing equipment, it is thoroughly polished. During the polishing process, your nails will become brighter and avoid unnecessary questions for customers. In the process of polishing, as well as in the process of nail production, problems such as the error caused by the speed of the knife, i.e. the three parts not opening well, are eliminated.

Mix polishing equipment PM-600
Produced	China
Model	PM-600
Weight	11100 kg
Voltage	380v50hz
Power consumption	2.2kw/h
Size	1640*900*1000mm
Speed of operation	600 kg at once
Duty cycle	1-3 hours

 

GRINDING EQUIPMENT

As a result of regular work with mixing equipment with metal, it is necessary to sharpen the blades installed on it frequently. Since the knives have a specific type, it is recommended to sharpen them using a special wheel.

Sharpening equipment NG-300
Produced	China
Model	NG-300
Weight	200 kg
Voltage	380v50hz
Power consumption	0.75kw/h
Size	1110*690*1200mm
Sharpening length	300mm
Area of use	For cutting knives

 

With the line recommended above, you will be able to produce nails and wires of any size. Realizing that mixing production is a profitable industry, we will help you find a qualified technologist and the necessary raw materials for production. Of course, some of our entrepreneurs may not have enough initial funds to purchase the above line, in such cases, we advise you to purchase nail-making equipment, polishing equipment, and wheels. And we undertake to conclude contracts for the wires of the diameter you need at low prices from the places where we sold the entire line.

For the above line, the buyer must fulfill the following requirements:

Indoor space of not less than 150 m2
2 workers
380 v 50 hz power supply for indoor installation
Other minor requirements as required by the engineer technologist
Video about the small line