1 / 12Development of packaging set for fruits and vegetables
Protective mesh (setka) made of foamed polyethylene to protect fruits and vegetables.
Individual offer
- Motor power
- 0.75 kw
- Delivery speed
- 200 kg
- Capacity
- 40 kW
- Output pressure
- 10-30 Mpa
- Heating power
- 3 kw
- Voltage
- 350V 50Hz
Price
Overview
Key advantages
- elastic structure
- solid material
- resistant to cold and hot temperatures
- resistant to decay
- environmentally friendly, safe to use
- resistant to rot
About the equipment
Protective mesh (setka) made of foamed polyethylene to protect fruits and vegetables. The holes in the set ensure the possibility of air exchange and prevent the quality of the products from being damaged and the appearance of mold. The set is made of whipped material, which protects fruits and vegetables from damage.
01
3 parametersAutomatic raw material loading equipment
- Delivery speed
- 200 kg / h
- Motor power
- 0.75 kw
- Delivery height
- 3 meters
02
2 parametersAutomatic raw material supply equipment
- Delivery speed
- 0.5-2 kg / h
- Motor power
- 0.75 kw
03
6 parametersExtruder equipment
- Voltage
- 350V 50Hz
- Capacity
- 40 kW
- Speed
- 5-60 rmp
- Production speed
- 17-22 kg / so
- Screw diamteri
- Daschatlari75mm
- Cooling type
- With water
04
5 parametersBhutan delivery system
- Pump type
- High pressure
- Type of foam-forming equipment
- Diluted butane dosing pump
- Transfer rate
- 16L / hour
- Output pressure
- 10-30 Mpa
- Motor (explosion proof
- 2.2 kw
05
6 parametersAnti-compression system (GMs pump)
- Pump type
- Superior
- Single cylinder anti-compression motor type
- Dispensed glycerin monostearate dosing pump
- Transfer rate
- 3.6 L/H
- Dosage container size
- 10L
- Output pressure
- 10-30 Mpa
- Engine power
- 0.75 kW
06
3 parametersAutomatic high speed hydraulic setka change system
- Hydraulics station
- 1 vol.
- Electrical appliances and pipes
- 1 set per engine
- Motor power
- 3 kw
07
6 parametersExtruder head (golovka) and mold
- Structure
- Round extruder has adjustable and pressure measuring device output head
- Materials
- Thermally machined high quality steel
- Temperature control zone
- Zone 3
- Temperature control accuracy
- ±1° C
- Heating power
- 3 kw
- Water cooling system in the head part
- Available
08
3 parametersCooling equipment
- Cooling type
- By air
- Cooling parts
- 2 PCs.
- Cooling ring diameter
- Depending on the diameter of the product
09
3 parametersCutting equipment
- Capacity
- 2.2 kw
- Speed control system
- Available
- Management system
- Available
Management system
- The control system is equipped with an air cooling fan to ensure that all electrical components work in good condition.
- To ensure that the equipment always works in the best condition, all parts in the electric control Cabinet have been used from internationally famous brands.
10
4 parametersTower for cooling with water
- Watercourse
- 50m3 / so
- Size
- 2215x2215x2830 mm
- Fan diameter
- 1400 mm
- Motor power
- 1.5 kw
11
2 parametersAir compressor
- Motor power
- 7,5 kVt
- Size
- 180 L
AFEX · CONSULTATION
Operators onlineQuick price request
Leave your name and phone number — our specialist will take care of the rest.
EquipmentDevelopment of packaging set for fruits and vegetablesYour data is never shared with third parties
Specifications
Data provided by the manufacturer; configuration may vary per order.
Automatic raw material loading equipment
3 parameters- Delivery speed
- 200 kg / h
- Motor power
- 0.75 kw
- Delivery height
- 3 meters
Automatic raw material supply equipment
2 parameters- Delivery speed
- 0.5-2 kg / h
- Motor power
- 0.75 kw
Extruder equipment
6 parameters- Voltage
- 350V 50Hz
- Capacity
- 40 kW
- Speed
- 5-60 rmp
- Production speed
- 17-22 kg / so
- Screw diamteri
- Daschatlari75mm
- Cooling type
- With water
Bhutan delivery system
5 parameters- Pump type
- High pressure
- Type of foam-forming equipment
- Diluted butane dosing pump
- Transfer rate
- 16L / hour
- Output pressure
- 10-30 Mpa
- Motor (explosion proof
- 2.2 kw
Anti-compression system (GMs pump)
6 parameters- Pump type
- Superior
- Single cylinder anti-compression motor type
- Dispensed glycerin monostearate dosing pump
- Transfer rate
- 3.6 L/H
- Dosage container size
- 10L
- Output pressure
- 10-30 Mpa
- Engine power
- 0.75 kW
Automatic high speed hydraulic setka change system
3 parameters- Hydraulics station
- 1 vol.
- Electrical appliances and pipes
- 1 set per engine
- Motor power
- 3 kw
Extruder head (golovka) and mold
6 parameters- Structure
- Round extruder has adjustable and pressure measuring device output head
- Materials
- Thermally machined high quality steel
- Temperature control zone
- Zone 3
- Temperature control accuracy
- ±1° C
- Heating power
- 3 kw
- Water cooling system in the head part
- Available
Cooling equipment
3 parameters- Cooling type
- By air
- Cooling parts
- 2 PCs.
- Cooling ring diameter
- Depending on the diameter of the product
Cutting equipment
3 parameters- Capacity
- 2.2 kw
- Speed control system
- Available
- Management system
- Available
Tower for cooling with water
4 parameters- Watercourse
- 50m3 / so
- Size
- 2215x2215x2830 mm
- Fan diameter
- 1400 mm
- Motor power
- 1.5 kw
Air compressor
2 parameters- Motor power
- 7,5 kVt
- Size
- 180 L
Included units
Units and accessories included with the equipment. Specifications for each are in the section above.
- 01
Automatic raw material loading equipment
3 parameters
- Delivery speed: 200 kg
- Motor power: 0.75 kw
- 02
Automatic raw material supply equipment
2 parameters
- Delivery speed: 0.5-2 kg
- Motor power: 0.75 kw
- 03
- 04
- 05
Anti-compression system (GMs pump)
6 parameters
- Transfer rate: 3.6 L/H
- Dosage container size: 10L
- 06
Automatic high speed hydraulic setka change system
3 parameters
- Hydraulics station: 1 vol
- Electrical appliances and pipes: 1 set per engine
- 07
Extruder head (golovka) and mold
6 parameters
- Temperature control zone: Zone 3
- Temperature control accuracy: ±1° C
- 08
- 09
- 10
- 11
Video
The equipment in operation.
Delivery and commissioning
From consultation to launch — four steps under contract.
Consultation
We define your needs, configure the line and prepare an offer.
Contract
Timeline, payment terms and warranty are fixed in the contract.
Delivery
The equipment is delivered from the manufacturer to your site.
Installation and training
Our specialists commission the equipment and train your operators.
Frequently asked questions
The most common questions about delivery, contracts and tracking.
Is it possible to track my orders online?
You can track orders online. Uzbekistan was one of the first to develop a mechanism for monitoring cargo, determining their location, and estimating the time of arrival using the GPS system. You can get this information only by entering the contract number.
How long will the shipments be delivered?
Delivery time depends on the manufacturer in most cases. Most large-scale production equipment takes 2-3 times longer to deliver than normal equipment. In the case of ready-made equipment, the delivery period starts from 30 days. Excluding the time required for customs clearance of equipment in the territory of Uzbekistan, certification processes.
What are the shipping methods available?
According to the type of goods from abroad and the period when the order was received, the goods are delivered to the territory of Uzbekistan on the following basis:
By air
By rail
By land transport
By mixed transport
What is required of me to conclude a contract?
To become a client of our company, you must:
CERTIFICATE certifying the business entity;
Bank details;
STIR number;
Copy of the manager's passport;
Enterprise seal to confirm the contract
Consultation
Let’s discuss your project together
Contact us for advice on choosing equipment, technical solutions and offers.
AFEX · SOCIAL
Follow our channels
New equipment, commissioning and production footage — on our official channels.
Related equipment
Food equipment
Grape juice production line
Details →
Food equipment
American popcorn production equipment
Details →
Metalworking equipment
Hose clamp assembly line
Details →
Metalworking equipment
AFEX portable metal marking equipment
Details →
Metalworking equipment
AFEX metal surface marking equipment
Details →
Food equipment
Horizontal cake cutting machine
Details →
Food equipment
Vacuum twin-shaft industrial mixer
Details →
Metalworking equipment
Fast 4-axis profile machining CNC center
Details →