Drilling equipment
Equipment amenities:
- The drilling rig is equipped with a wheeled walking mechanism and a hydraulic cylinder support, which is convenient for moving the whole equipment and easy to adjust the level of the drilling rig.
- By using the ball card holding mechanism to replace the chuck, it can realize non-stop stick, convenient operation, safe and reliable.
- There is an oil pressure feeding mechanism to improve drilling efficiency.
- The lifting and lowering tower is a hydraulic operation, which is convenient and reliable.
- The diesel engine uses electric start to reduce the labor intensity of the worker.
Drilling equipment | |
Model | AFX-X3YX |
Drilling depth | 600 m |
Drilling diametric | F75-F325 |
Drilling angle | 90-75 degrees |
Sludge pump (with 22 diesel engines) | BW250 |
Size | 2.9*2.56*3.3 m |
Weight | 2600 kg |
Type of fuel | Diesel |
Drilling method | rotation |
Movement | Comfortable |
Diesel pump for use in drilling-BW250
Screw | |
Maximum pulling power | 3000 kg |
Cable diameter | 12.5 mm |
Towing speed | 0.3-1.9 (m/s) |
Roll size | 65 m |
Spindle | |
Speed (r/min) | 32-1057 |
Diameter | 600 mm |
Drilling Bridge | |
Nominal load | 18 t |
Height | 11mm |
Drill pipe
Drill pipe | |
Diameter | 60 mm |
Length | 4,2 m |
Quantity | 200 m |
Pipe connector
The diameter is 80 mm, 48 pieces are needed.
Additional accessories:
Auger for sand and soil, clay – Diameter 220 mm, 2 pcs
PDC drill for stone – diameter 220 mm, 2 pcs.
Trikon bura – 220 mm, 2 pcs. Tricon burs are commonly used for a wide range of rock types, and are flexible from soft to very hard rocks.
There are no reviews yet.