Usb, Hdmi, Aux and other types of cables production line

1) EQUIPMENT FOR SEPARATION OF CABLE INSULATION

The cable is first cut to the size required by the customer. Currently popular sizes are around 80-100 cm. The cut cables are passed through special equipment and their ends are separated from the insulation. We do not recommend separating the cables from the insulation by hand, because the first one takes a lot of time and the quality of the work is impaired. The equipment is designed to work at table temperature, and its use is almost effortless. The machine also cuts to the length you specify. This allows you to work with coiled cables as well.

2) EQUIPMENT FOR WELDING USB METAL HEAD TO CABLE (PART A)

This equipment allows you to automatically weld a small metal part to a cable using tin. In addition to automatic welding, the equipment also cools it. The equipment has speed control according to the type of product. In this part, you can choose a metal part according to the model of the phone and install the necessary molds. We recommend production for the most popular 3 different phone models. iPhone, Type-C, and Android all need separate molds to work with them.

3) USB CABLE SMALL METAL PART WELDING EQUIPMENT (PART B)

We know that any of our USB cables have metal parts on both sides, and one side is connected to a phone, tablet or other device, and the other side is connected to a power source or computer. Our company offers you a proven method, we want to say that we offer you 2 types of welding equipment, type A and type B. If the first equipment is used to weld the part that will be connected to the Phone, you will have to change the mold to weld the second part. It will take you 1 day to change the mold, which may cause you to lose the speed and quality of your production. For this reason, we also recommend you a second type B welding equipment.

4) THERMOPLAST EQUIPMENT WORKING UNDER VERTICAL PRESSURE

This stage is also one of the most important parts. The reason is that the USB cables you solder are actually already ready to use, but to give your product a high-quality and safe appearance, the top part is melt-injected with PVC granules under high pressure.

Vertical Thermoplastic Equipment We provide our customers with convenient size equipment to produce a wider range of products.

You have the opportunity to put your brand on the face of the product at this stage. A brand or some logo is printed on the mold during the order, and you have to buy an additional mold to change it. each mold consists of an upper and a lower part. Therefore, when you choose a LOGO or Brand, you should believe and act that its life will be eternal. Molds are selected depending on the type of product you are producing.

For example, to produce one type of USB cable, you need 2 inner and 2 outer molds. You can also choose only 2 external molds, but the possibility of damage to the USB cable is high. The inner mold is only poured at the point where the soldered wire and the metal part of the USB are joined, while the outer mold gives it a final look, meaning that the inner part of the product is not visible in the final product.

5) USB CABLE TEST EQUIPMENT

Any product must be tested in special testing equipment after production. By testing, you will prevent defective cables from being sold. If your product is found to be unsatisfying during customer testing, it may cause a loss of confidence in your product and encourage other customers not to buy from that brand. The test equipment is so versatile that you can even check if any of the wires in the cable are not well soldered based on the data transfer rate.

We also inform you that we bring all kinds of raw materials needed for your production directly from the factory at low prices. So we can say that you do not have any problems related to product shortages.

Currently, the production of USB cables has not lost its relevance for the era and is a highly liquid product. You can earn from 1500 to 3000 soms net profit from each product depending on its quality.