Pen production line
Out of stock
Ballpoint pens are one of the most widely used tools in everyday life today. This fully automated production line ensures the assembly of pens with high precision, quality, and speed. The line is designed based on modern technologies, allowing the production of large quantities of products with minimal labor resources. It features adjustable systems for pens of different sizes and designs.
The equipment set includes an ink refill assembly machine, a main body assembly unit, a compressed air system, an electric control panel, and product sorting and packaging modules.
Out of stock
| Parameter | Value |
| Model | UYT-R100 |
| Country of origin | China |
| Raw material | Polypropylene (PP), ink, metal rod |
| Product type | Writing pen (plastic body) |
| Production capacity | 70,000 – 160,000 pcs/day (automatic mode) |
| Material | Plastic (PP/PS), metal, ink |
| Equipment weight | ≈ 3,500 kg (entire line) |
| Dimensions | ≈ 12 m × 3.5 m × 2.5 m (full line) |
| Voltage / power | 380V, 50Hz, 3 phase / 8–10 kW |
| Labor requirement | 2 operators (per shift) |
| Power consumption | 8–10 kWh |
| Gas supply | Not required |
| Wastewater | Not required, closed system |
Included equipment
Injection Molding Machine (RT160)
-
Raw material preparation (plastic granules)
Production begins with polypropylene (PP), polystyrene (PS), or other suitable plastic granules. The granules are pre-dried and mixed. -
Extrusion – molding pen parts
The dried granules are melted through an extruder and, using molds, the following plastic parts of the pen are produced:
-
Body (barrel)
-
Cap
-
Finger grip
-
Inner mechanism shell
The molding process is carried out on injection molding machines, with temperature and pressure automatically controlled.
| Parameter | Value |
| Model | RT160 |
| Screw diameter | 42 / 45 / 48 mm |
| Injection volume | 265 / 297 / 338 cm³ |
| Shot weight | 235 / 267 / 308 g |
| Injection speed | 120 / 135 / 152 g/s |
| Injection pressure | 200 / 180 / 158 MPa |
| Clamping force | 1600 kN |
| Opening stroke | 380 mm |
| Mold thickness | 200–530 mm |
| Tie-bar spacing | 460×460 mm |
| Motor power | 15 kW |
| Heating power | 8.8 kW |
| Dimensions | 4.75 × 1.30 × 1.65 m |
Ink Tube Assembly Machine
-
Ink core production
The ink core (internal writing parts) is assembled in a separate machine. At this stage:
-
Metal rod
-
Ink tube
-
Ink
-
Tip (writing point)
are automatically assembled and prepared.
This equipment is designed for automatic assembly of the ink core of standard ballpoint pens. It operates at high speed, ensures stable production capacity, and reduces dependence on human factors. High-precision components guarantee processing quality. It is a reliable and efficient solution for industrial enterprises.
| Parameter | Value |
| Power supply | 220/380 V, 50/60 Hz, 1/3 phase |
| Power | 2.5 kW |
| Operating speed | 140–160 pcs/min |
| Air pressure | 5–6 bar |
Pen Assembly Machine (DR-400)
-
Final Assembly
With the help of the assembly machine, the body, core, and other parts are combined.
All components are accurately positioned and firmly connected.
At this stage, the pen becomes fully assembled.
This equipment is designed for fully automatic assembly of plastic pens. It precisely places all components of the pen, ensuring the production of high-quality and uniform products. The manufacturing process is carried out with high accuracy and speed, which significantly increases efficiency. It is a convenient, reliable, and easily adjustable solution for enterprises.
| Parameter | Value |
| Model | DR-400 |
| Power supply | 220/380 V, 50/60 Hz, 1/3 phase |
| Power | 2.5 kW |
| Operating speed | 70–80 pcs/min |
| Air pressure | 5–6 bar |
Hot Stamping Machine
Hot Stamping (Hot Stamp Stage)
Logos, inscriptions, or graphic decorations are stamped onto the finished pen bodies (if required). At this stage, special hot stamping equipment is used.
| Parameter | Value |
| Stamping area | 30×160 mm |
| Diameter | 8–30 mm |
| Roller size | Ø 50–100 mm |
| Heating power | 2000 W |
| Transfer time | 0–99 s |
| Film winding time | 0–99 s |
| Voltage | 220V, 50Hz (16A) |
| Max pressure | 100–250 kgf |
| Operating speed | 60 pcs/min |
| Weight | 500 kg |
| Dimensions | 1200×1400×1600 mm |
Cooling Chiller (TY-3 ACI)
| Parameter | Value |
| Model | TY-3 ACI |
| Cooling capacity | 12000 KCal/h |
| Power | 2 kW |
| Pump power | 0.5 HP |
| Max water flow | 80 L/min |
| Tank capacity | 80 L |
| Dimensions | 1200 × 600 × 1270 mm |
| Weight | 270 kg |
Automatic Loader
| Parameter | Value |
| Model | REF-1.5 |
| Motor power | 1.1 kW |
| Capacity | 450 kg/h |
| Hopper capacity | 6 L |
| Pipe size (material/air) | 1.5 / 1.5 inch |
| Dimensions | 820 × 550 × 525 mm |
| Weight | 50 kg |
Crusher
| Parameter | Value |
| Model | RWS300 |
| Power | 5.5 kW |
| Chamber size | 250 × 300 mm |
| Capacity | 250–400 kg/h |
| Dimensions | 1240 × 910 × 1310 mm |
| Weight | 390 kg |
Mixer
| Parameter | Value |
| Model | FFR-50E |
| Motor power | 1.5 kW |
| Mixing capacity | 50 kg / 3 min |
| Weight | 140 kg |
| Dimensions | 790 × 790 × 1115 mm |
FINISHED PRODUCTS
Based on 0 reviews
Be the first to review “Pen production line”
Related products
-
Other equipment
robotic forklift equipment AFBOT30
The AFBOT30 model is a forklift with a modern autonomous control system, ensuring high efficiency in production and warehouse infrastructure. The device runs on the Android system, which allows it to be integrated with various software platforms.
SKU: n/a -
Other equipment
Equipment for the production of bath bombs
Bath bombs are flavored and foamy products designed to be added to water during bathing. Once in the water, they dissolve, fill the bath with a pleasant aroma and color the water. Skin care moisturizers often contain oils, salts and vitamins that make the bath more fragrant and pleasant. The best way to turn an ordinary bath into a spa.
SKU: n/a -
Other equipment
Concrete pipe production machine
The cement collector pipe production equipment is designed for precise and stable manufacturing of cement collector pipes and blocks. The machine operates with a total power capacity of 13.5 kW, ensuring high reliability during continuous production. When delivered in wooden crates, its total weight reaches 1800 kg.
Each production cycle has a capacity of 150–200 cement blocks, making it suitable for medium and large-scale manufacturing plants. Its durable construction and large dimensions guarantee stability during operation, while the optimized electrical system ensures energy efficiency.
SKU: n/a
There are no reviews yet.