,

Corner profile (perfougol) Production equipment

Availability:

Out of stock


Home renovation is a pursuit of beauty and well-being. If the walls are uneven or there are small errors along the surface, this is not scary. The most important thing is the flatness of the corner edges, because the corner edges are the part that quickly attracts a person’s attention. How to achieve a smooth edged surface?

19,800$

Out of stock

Few people know that the secret of the visual beauty of the walls lies in the correct and precisely edged profiles. This concept refers to the following areas of application of sand plasters:

external and internal angles;

connecting walls on ceilings and floors;

protruding parts of any structures (belts, boxes, other structures).

All these areas (edges) must fit the intended design. It should be straight and solid. Former plasterers achieved the acceptable quality almost by hand. But modern accessories simplify and speed up the process. Therefore, the demand for these accessories is increasing day by day.

In fact, all of them are widely used corner profiles with holes for sand plaster or plaster. They are used almost everywhere where gypsum mixtures are used with corners. Corner profiles with flat holes are available for internal corners and external corners. It can be of different widths, as well as aluminum, metal or plastic (made of polyvinyl chloride). In general, there is no difference in function. You cannot say that some are better or worse. But the galvanized metal corner is tougher than others and resistant to deformation under external influence. Therefore, it is convenient to use it with gypsum or sand plaster.

Today we will tell you about the equipment for the production of metal corner profiles.

TIN ROLL CONVEYING EQUIPMENT

Tin roll transfer equipment
Workable material Black metal tin and galvanized tin
Tin width 50-100 mm, other sizes may be available according to the customer’s request
Tin thickness 0.3-1.5mm
Transmission speed It varies depending on the mechanical tension
Dimensions 500*650*1000 mm
Weight Around 110kg

 

 

VARIABLE SPEED TRANSMISSION DEVICE

Variable speed transmission device
Workable material Black metal tin and galvanized tin
Tin width 50-60 mm, there can be other sizes according to the customer’s request
Tin thickness 0.3-1.5mm
Transmission speed 0-20m/s
Dimensions 500*750*1000mm
Weight Around 100
Power consumption 0.5 kw/h
Voltage 380V50Hz 3 phase
Control Panel Button control

 

 

STAMPING EQUIPMENT FOR HOLES

Press stamping equipment
Workable material Black Metal tin and galvanized tin
Tin width 50-60 mm, there can be other sizes according to the customer’s request
Tin thickness 0.3-0.6mm
Tons of clicks 40T
Dimensions 1100*750*2050mm
Weight Around 1.5t
Power consumption 3 kw/h
Voltage 380V 50Hz 3 phase
Control Panel Button control
Production speed 40-45m/min
Mold material Cr12

 

 

EQUIPMENT FOR MANUFACTURING V-SHAPED CORNER PROFILE

Technical characteristics of V-profile equipment
Workable material Black metal tin and galvanized tin
Tin width 50-60 mm, there can be other sizes according to the customer’s request
Tin thickness 0.3-0.6mm
Number of rollers 10 rows
Dimensions 2.6*0.5*1 m
Weight Around 1.5 t
Power consumption 5.5 + 3 sq
Hydraulic pressure force 40#
Roller diameter size F45mm
Voltage 380V 50Hz 3 phase
Control Panel PLC control
Error rate up to 1.00mm

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Corner profile (perfougol) Production equipment”

There are no reviews yet.