Automatic plastic bag production line
Out of stock
According to the decision introduced by our government, from January 1, 2019, sellers were prohibited from providing free polyethylene bags to customers who purchased products. In addition, it was forbidden to add the value of packages to the price of purchased products or to sell them at prices below their cost. Taking into account foreign experience and public discussion, the State Ecology Committee, together with the relevant ministries and agencies, was tasked with submitting reasonable proposals for the introduction of an environmental levy to the group of manufactured and imported goods that cause damage to the environment after losing their useful properties by January 1, 2020.
Also, it is prohibited to produce packages from polymer film with a thickness of less than 40 microns on the territory of the country. Only packages made of polymer materials without biodegradable handles – packages that are considered an integral part of product packaging, as well as packages for household use – were allowed. After reading the above points, many people may have thought that plastic bags are about to disappear, but this is not quite true. Currently, the recycling of plastic products is widely promoted, and because it is somewhat difficult to recycle very thin plastic bags and it is not justified to recycle them, we can say that it is easier to recycle thicker plastic bags, i.e. 40 microns.
63,500$
Out of stock
General information about the line
Required building size: 100 m2
Energy type: Electric current
Voltage: 380 V 50/60 Hz
Power consumption: 43 kw / h
Number of workers required: 2 minimum
2-color rotogravure printer extruder for plastic bags
With the line we recommend you below, you can produce packages up to 200 microns thick. The equipment is made on the basis of the most modern technologies, a PLC control system is installed in it, and everything is under your control through the TOUCH SCREEN panel. We have installed an online 2-color rotogravure printer on the equipment, which allows you to print the necessary logos on the packages during the work process. Rotogravure and Flexo printers are used for packaging, and their print quality varies. Flexo, for example, works by printing an image onto a rubber shaft, and small details and text can be lost or blurred. Rotogravure printers use the latest generation of laser engraving on a metal shaft. In this process, image clarity is ensured, in which even small text is clearly visible.
Advantages of the equipment
- A rotogravure printer is used, which can print an image on both sides of the product at the same time
- The equipment can use PE/HDPE/LDPE/LLDPE/recycled PE granules as raw material.
- The screw material is made of durable 38CrMoAl and comes with a 2-year warranty
- The possibility of using a cylinder of different diameters (75-180mm)
- Cast aluminum with ceramic coating for heating, giving you high efficiency with low power generation of heating elements
- Computerization of product output speed control
- The ability to make labels for various products (salt, pasta, napkins, bread, etc.).
-
Extruder with 2-color rotogravure printer for plastic bags Raw material type PE/HDPE/LDPE, secondary PE Screw diameter 45mm Working width 100-550mm Thickness 0.012-0.3mm Extruder motor power 7.5kw Speed of operation 0-50 meters/minute Power consumption Q25kw/h Production volume 45 kg/hour Weight 2700 kg Size 6000x1600x3500mm
Automatic packet caching and tracing
The equipment is a high-efficiency equipment for cutting, welding and opening the grip area of the semi-finished product coming out of the roll package extruder.
- The equipment is fully automatic and at the same time cuts the plastic bags in the required sizes, counts them in the desired quantity and prepares them for packaging.
- The control panel of the equipment is equipped with a touch screen with a microcomputer PLC control panel.
- The equipment is equipped with a servo motor, and the speed can be easily controlled.
- Makes a low noise.
- You can also produce other types of handle packs by changing the machine’s imprinting die.
| Automatic package cutting and tracking equipment | |
| Working width | 100-500mm |
| Working length | 100-3000mm |
| Speed | 50-100 pieces/minute |
| Power consumption | 4.3 sq |
| Control Panel | Microcomputer, PLC sensor |
| Weight | 650 kg |
| Size | 3000x1000x1600mm |
Samples of products
Automatic roll package cutting equipment
The equipment has a high effective speed and is able to work with semi-finished products on two hangers at the same time.
Advantages of the equipment
- The control panel of the equipment is equipped with a touch screen with a microcomputer PLC control panel.
- The equipment is equipped with a servo motor (Taiwan), so you can change the speed according to your convenience.
- You can place 2 rolls in the machine at the same time.
- When an error occurs, the equipment will automatically stop and inform you where the error is occurring.
- .
Automatic roll package cutting equipment Working width 500mm Working length 1200mm Speed 40-120 pieces/minute Power consumption 3kw Control Panel Microcomputer, PLC sensor Thickness 0.008-0.15mm Weight 900 kg Size 3400x1300x1700mm
Finished products
Air compressor
| Air compressor | |
| Power | 11kw |
| Production volume | 1200L/minute |
| Air pressure | 16 bars |
| Noise | 68dBA |
| Voltage | 380V50Hz |
| Weight | 500 kg |
| Size | 2100x850x1500mm |
Based on 0 reviews
Be the first to review “Automatic plastic bag production line”
Related products
-
Plastic recycling
Special mixer for PVC
High performance requirements, new properties of raw materials, sequence of technological processes or increasing quality requirements – there are many reasons for adjusting the parameters of the production line. Often, quality preparation of the first step in the technological chain of the material is not considered properly. However, a well-optimized mixture is the basis of a highly reproducible result. The function of these mixers is to ensure uniform and equal distribution of stabilizers, oil-based materials and modifiers. This mixer turns the mixture into a dust-free, dry state.
The heating mixer is designed to heat and mix the material and all parts to a temperature of 110 C to 130 C for 5-8 minutes. This process binds all compounds to the material particles. However, at this temperature, bonding waxes are still somewhat viscous and the composite tends to not compress under pressure. Therefore, the mixture is transferred from the heating mixer to the cooling mixer, where it is cooled to about 40 C. After that, the mixed material is cooled in a vertical cooling mixer. In the next step, the mixed material can be used for ensiling and further processing including extrusion.
SKU: n/a -
Plastic recycling
Mini extruder equipment for the production of plastic bags
Now you can buy small-scale equipment from us for the package manufacturing industry, which is one of the most popular businesses. This allows you to design the equipment precisely for your small business and start your planned business even when you do not have enough funds.
SKU: n/a -
Construction equipment, Metalworking equipment
Gypsum board profile production equipment (double mold)
Construction equipment, Metalworking equipmentGypsum board profile production equipment (double mold)
Gypsum plasterboard products have entered the modern construction industry at a rapid pace, and in turn, the demand for accessories necessary for the installation of this product has increased significantly. Due to the increase in demand, metal profiles began to take the place of wooden slats on the market.
SKU: n/a
There are no reviews yet.