# 16-63 mm polyethylene pipe production line Catalog: Plastic recycling Updated: 2026-07-14 ## Overview General Information about the Line Pipe diameter: 16 - 20 - 25 - 32 - 40 - 50 - 63 mm Production capacity: 150-200 kg/hour Voltage: 380 V 50 Hz Required power: 98 kW Average power consumption: 78 kW Pipe Parameters - 16 mm Diameter Pipe Wall thickness: 1.0+0.5 mm Weight: 46 gr/m - 20 mm Diameter Pipe Wall thickness: 1.0+0.5 mm Weight: 57 gr/m - 25 mm Diameter Pipe Wall thickness: 2.0+0.5 mm Weight: 144 gr/m - 32 mm Diameter Pipe Wall thickness: 2.0+0.5 mm Weight: 188 gr/m - 40 mm Diameter Pipe Wall thickness: 2.2+0.5 mm Weight: 261 gr/m - 50 mm Diameter Pipe Wall thickness: 2.8+0.5 mm Weight: 415 gr/m - 63 mm Diameter Pipe Wall thickness: 3.5+0.5 mm Weight: 654 gr/m Equipment and Devices in the Line - Vacuum loader - Hopper dryer - Single-screw main extruder - Extruder for colored stripes - Automatic mesh filter and hydraulic oil station - Molds for 16-63 mm pipes - Vacuum calibration and cooling tank - Cooling tank - Pipe stretching device - Cutting machine - Two-chamber wrapping machine - Laser marking machine (optional) Technical Specifications Vacuum Loader The loader serves to transport the raw material to the dryer using air. Raw Material Inlet Section - Vacuum Stretching Section - Raw Material Storage Tank - Stretching Pipe - Drying Hopper Technical Specifications: - Static Pressure (Maximum): 9800 Pa - Voltage: 380V 50 Hz - Motor Power: 1.5 kW - Production Capacity: 10 m³ \<300 kg/hour - Hopper Size: 10 Liters Hopper Dryer The raw material is dried before entering the extruder; this equipment is used for drying. - Capacity: 160 L - Production Capacity: 100 kg - Fan Motor Power: 0.25 kW - Heating Power: 5.4 kW - Maximum Temperature: 130 ℃ - Material of Parts in Contact with Plastic: Stainless Steel - Dimensions: 1650 x 650 x 1650 mm - Weight: 90 kg Single-Screw Main Extruder General Description Main Electrical Components - Frequency Converter: Delta brand - Contactor: Siemens - Temperature Controller: RKC (Japan) Production Capacity: 200 kg/hour Extruder and Mold Connection Type: Bolt connection Advantages: - Main components are from top-tier brands. - Real-time quality control. Screw (Rotor): - Diameter: 50 mm - L/D Ratio: 38/1 - Material: 38CrMoAlA, nitrided - Heating (Heater): Stainless steel outer cover with cast aluminum heater - Heating Zones: 5 zones - Heating Power: 4 kW x 5 units Barrel: - Barrel Type: With a feeding tube; water cooling inlet hole available Cooling: Fan-assisted cooling - Temperature control accuracy: ±1 ℃ - Number of Cooling Zones: 5 - Material: 38CrMoAlA, nitrided Transmission System: - Main Motor Power: 55 kW - Main Motor Speed Adjustment Mode: Delta inverter - Main Motor Speed: 1500 rpm Gearbox: - Gear Type: Hardened surface gears - Shaft: NSK brand (Japan) - Gear Material: 20CrMnTi - Manufacturing Factory: Guomao (China) Automatic Mesh Filter and Hydraulic Oil Station This filter traps impurities in the plastic, improving the quality of the pipes. Elbow Specifications - Elbow Diameter: 160 mm - Motor Power: 1.5 kW - Elbow Material: 40Cr - Hydraulic Oil Station Working Pressure: 30 MPa - Oil Tank Capacity: 40 L Extruder for Colored Stripes Extruder for Colored Stripes (continued) - Diameter: 25 mm - L/D Ratio: 25/1 - Production Capacity: 2-10 kg/hour - Motor Power: 1.5 kW - Main Motor Speed Adjustment Mode: Inverter Molds for 16-63 mm Pipes Molds for 16-63 mm Pipes (continued) - Pipe Diameters: 16-20-25-32-40-50-63 mm - Pressure Class: 4-20 bar (0.4-2 MPa) - Mold Housing Material: Steel 45 \#, hardened and polished - Mold Internal Material: 40Cr - Calibration Sleeve Material: Tin bronze Vacuum Calibration and Cooling Tank Vacuum Calibration and Cooling Tank (continued) - Tank Length: 6000 mm - Water Tank Material: SUS304 - Sleeve Material: Tin bronze - Cooling Type: Water spraying - Spraying Zones: 4 - Water Pump Power: 3 kW x 2 units - Vacuum Pump Power: 3 kW x 2 units - Vacuum Level: 0.03-0.05 MPa - Forward and Backward Movement Range: ±600 mm, motor-driven - Up and Down Movement Range: 50 mm, manual operation - Dimensions: 6000 x 650 x 1250 mm - Weight: 1250 kg Cooling Tank Cooling Tank (continued) - Tank Length: 6000 mm - Tank Material: SUS304 - Cooling Type: Water-based - Height Adjustment: Manual operation - Electrical Components: Japan brand - Dimensions: 6020 x 480 x 1250 mm - Weight: 850 kg Pipe Stretching Device The stretching device serves to pull the PE pipe steadily and in synchronization with the extruder speed. Stretching Section - Stretching Length: 1200 mm - Stretching Motor Power: 1.5 kW x 2 units - Stretching Speed: 0.5-15 meters/min - Speed Control: Via inverter Cutting Machine The equipment is housed in a casing that is protected from dust and other particles. Cutting Machine (continued) - Knife Type: Automatic counting cutter - Cutting Diameter: 16-63 mm - Cutting Type: Dust-protected cutting - Cutting Speed Type: Synchronizes with the main machine speed - Motor Power: 1.1 kW - Knife Material: Cast steel - Maximum Cutting Thickness: 18 mm - Maximum Cutting Speed: 12 m/min - Compression Mode: Pneumatic - Control: Computerized control - Equipment Dimensions: 2100 x 610 x 1360 mm ### Two-Chamber Wrapping Machine Two-Chamber Wrapping Machine (continued) Features: - Convenient structure, high level of automation, easy and comfortable operation - Wrapping speed and internal wrapping diameter are freely adjustable - Equipped with an automatic wrapping device, ensuring smooth and uniform movement - Maintains consistent tension and wrapping speed during operation Wrapping Chambers: 2 units Pipe Sizes to be Wrapped: 16-63 mm Maximum Wrapping Speed: 0-12 m/min Internal Wrapping Diameter: 350-900 mm External Wrapping Diameter: 950-1400 mm Wrapping Stroke: Automatic Unwinding Method: Manual Air Pressure: 0.3-0.6 MPa Laser Marking Equipment Depending on the customer’s requirements, an additional laser unit can be installed on the line for printing dates and other inscriptions. ## Video - https://youtu.be/B1b8Co7xqWA Tags: groove, gushir, PE-pipe, PE-pipe, pipe, pipe production, pipe production, polyethylene **Price:** Delivery, installation, warranty — request a quote. --- Page (HTML): https://afex.uz/en/product/16-63-mm-polyethylene-pipe-production-line/ en · [ru](https://afex.uz/ru/product/%d0%bb%d0%b8%d0%bd%d0%b8%d1%8f-%d0%bf%d0%be-%d0%bf%d1%80%d0%be%d0%b8%d0%b7%d0%b2%d0%be%d0%b4%d1%81%d1%82%d0%b2%d1%83-%d0%bf%d0%be%d0%bb%d0%b8%d1%8d%d1%82%d0%b8%d0%bb%d0%b5%d0%bd%d0%be%d0%b2%d1%8b.md) · [uz](https://afex.uz/product/polietilen-quvurlar-ishlab-chiqarish-liniyasi.md) · [kk](https://afex.uz/kz/product/16-63-mm-polietilen-qubyrlar-ondiru-jelisi.md) · [tg](https://afex.uz/tj/product/khati-istehsoli-quburhoi-polietilenii-16-63-mm.md) · [zh-CN](https://afex.uz/cn/product/16-63mm-juyixi-pe-guancai-shengchan-xian.md)